<![CDATA[studentsuvidha - 8th semester IPU B.tech CIVIL papers and Notes -free downloads]]> https://studentsuvidha.com/forum/ Fri, 08 May 2026 19:47:54 +0000 MyBB <![CDATA[HVPE -II IPU Btech 2018 Question Paper]]> https://studentsuvidha.com/forum/Thread-HVPE-II-IPU-Btech-2018-Question-Paper Thu, 23 Aug 2018 10:44:12 +0000 Dipesh S]]> https://studentsuvidha.com/forum/Thread-HVPE-II-IPU-Btech-2018-Question-Paper Hi, Students!

This is originally scanned copy of question paper of Human Values and Professional Ethics-II of IPU Btech of the year 2018

Hope this is helpful for you

If this is helpful for you then don't FORGET to help other students by posting some useful stuff here or mail at admin@studentsuvidha.com

Thanks
Dipesh
.pdf
ETHS402.pdf (Size: 654.22 KB Downloads: 654)
]]> Hi, Students!

This is originally scanned copy of question paper of Human Values and Professional Ethics-II of IPU Btech of the year 2018

Hope this is helpful for you

If this is helpful for you then don't FORGET to help other students by posting some useful stuff here or mail at admin@studentsuvidha.com

Thanks
Dipesh
.pdf
ETHS402.pdf (Size: 654.22 KB Downloads: 654)
]]> <![CDATA[PMCP IPU Btech 2018 Question Paper]]> https://studentsuvidha.com/forum/Thread-PMCP-IPU-Btech-2018-Question-Paper Thu, 23 Aug 2018 10:42:12 +0000 Dipesh S]]> https://studentsuvidha.com/forum/Thread-PMCP-IPU-Btech-2018-Question-Paper Hi, Students!

This is originally scanned copy of question paper of Planning and Management of Construction Projects of IPU Btech of the year 2018

Hope this is helpful for you

If this is helpful for you then don't FORGET to help other students by posting some useful stuff here or mail at admin@studentsuvidha.com

Thanks
Dipesh
.pdf
ETCE404.pdf (Size: 1.45 MB Downloads: 222)
]]> Hi, Students!

This is originally scanned copy of question paper of Planning and Management of Construction Projects of IPU Btech of the year 2018

Hope this is helpful for you

If this is helpful for you then don't FORGET to help other students by posting some useful stuff here or mail at admin@studentsuvidha.com

Thanks
Dipesh
.pdf
ETCE404.pdf (Size: 1.45 MB Downloads: 222)
]]> <![CDATA[Analysis and Design of Bridges IPU Btech 2018 Question Paper]]> https://studentsuvidha.com/forum/Thread-Analysis-and-Design-of-Bridges-IPU-Btech-2018-Question-Paper Thu, 23 Aug 2018 10:39:49 +0000 Dipesh S]]> https://studentsuvidha.com/forum/Thread-Analysis-and-Design-of-Bridges-IPU-Btech-2018-Question-Paper Hi, Students!

This is originally scanned copy of question paper of Analysis and Design of Bridges of IPU Btech of the year 2018

Hope this is helpful for you

If this is helpful for you then don't FORGET to help other students by posting some useful stuff here or mail at admin@studentsuvidha.com

Thanks
Dipesh
.pdf
ETCE406.pdf (Size: 931.31 KB Downloads: 214)
]]> Hi, Students!

This is originally scanned copy of question paper of Analysis and Design of Bridges of IPU Btech of the year 2018

Hope this is helpful for you

If this is helpful for you then don't FORGET to help other students by posting some useful stuff here or mail at admin@studentsuvidha.com

Thanks
Dipesh
.pdf
ETCE406.pdf (Size: 931.31 KB Downloads: 214)
]]> <![CDATA[GWADM IPU Btech 2018 Question Paper]]> https://studentsuvidha.com/forum/Thread-GWADM-IPU-Btech-2018-Question-Paper Thu, 23 Aug 2018 10:34:00 +0000 Dipesh S]]> https://studentsuvidha.com/forum/Thread-GWADM-IPU-Btech-2018-Question-Paper Hi, Students!

This is originally scanned copy of question paper of Ground Water Assessment, Development and Management of IPU Btech of the year 2018

Hope this is helpful for you

If this is helpful for you then don't FORGET to help other students by posting some useful stuff here or mail at admin@studentsuvidha.com

Thanks
Dipesh
.pdf
ETCE412.pdf (Size: 1.34 MB Downloads: 192)
]]> Hi, Students!

This is originally scanned copy of question paper of Ground Water Assessment, Development and Management of IPU Btech of the year 2018

Hope this is helpful for you

If this is helpful for you then don't FORGET to help other students by posting some useful stuff here or mail at admin@studentsuvidha.com

Thanks
Dipesh
.pdf
ETCE412.pdf (Size: 1.34 MB Downloads: 192)
]]> <![CDATA[Environment Engineering IPU Btech 2018 Question Paper]]> https://studentsuvidha.com/forum/Thread-Environment-Engineering-IPU-Btech-2018-Question-Paper Thu, 23 Aug 2018 10:29:47 +0000 Dipesh S]]> https://studentsuvidha.com/forum/Thread-Environment-Engineering-IPU-Btech-2018-Question-Paper Hi, Students!

This is originally scanned copy of question paper of Environment Engineering of IPU Btech of the year 2018

Hope this is helpful for you

If this is helpful for you then don't FORGET to help other students by posting some useful stuff here or mail at admin@studentsuvidha.com

Thanks
Dipesh
.pdf
ETCE422.pdf (Size: 1.5 MB Downloads: 247)
]]> Hi, Students!

This is originally scanned copy of question paper of Environment Engineering of IPU Btech of the year 2018

Hope this is helpful for you

If this is helpful for you then don't FORGET to help other students by posting some useful stuff here or mail at admin@studentsuvidha.com

Thanks
Dipesh
.pdf
ETCE422.pdf (Size: 1.5 MB Downloads: 247)
]]> <![CDATA[Offshore structural Engineering IPU civil notes and question paper free download]]> https://studentsuvidha.com/forum/Thread-Offshore-structural-Engineering-IPU-civil-notes-and-question-paper-free-download Mon, 24 Apr 2017 19:50:20 +0000 Dipesh S]]> https://studentsuvidha.com/forum/Thread-Offshore-structural-Engineering-IPU-civil-notes-and-question-paper-free-download SYLLABUS:-

UNIT I 
Concrete/composites: Underwater concrete, mix design, quick setting compounds, high strength grout, fiber reinforced plastics, special composite materials for under water repairs. 
Structural Steel: Corrosion Mechanism; Types of corrosion; Seawater corrosion; corrosion allowance, cathodic protection design, impressed current method, sacrificial anodes design, protective coatings, splash zone protection, cathodic protection monitoring system. 
Underwater repair: Underwater welding, repair schemes for tubular members, grouted sleeve connections, and stressed – grouted connections for tubular joints.

UNIT II 
Static Structural Analysis: Estimation of wave and current loading on framed structures; maximum base shear and overturning methods; Cyclic loads for fatigue analysis.  
Dynamic Structural analysis: Dynamic analysis of framed structures; Mode shapes and Eigen frequency analysis; Wave response; dynamic wave response; frequency and time domain analysis of risers and pipelines.

UNIT III 
Loads on offshore structures: Wind Loads; Wave and Current Loads; Calculation based on Maximum base Shear and Overturning Moments; Design Wave heights and Spectral Definition; Hydrodynamic Coefficients and Marine Growth; Fatigue Load Definition and Joint Probability distribution; Seismic Loads.

UNIT IV 
Foundation for Offshore Structures: Mud-mats: bearing capacity, sliding stability, over-turning stability, short term and long term settlements, factor of safety; Bucket foundation; Suction anchors; Gravity foundation.]]> SYLLABUS:-

UNIT I 
Concrete/composites: Underwater concrete, mix design, quick setting compounds, high strength grout, fiber reinforced plastics, special composite materials for under water repairs. 
Structural Steel: Corrosion Mechanism; Types of corrosion; Seawater corrosion; corrosion allowance, cathodic protection design, impressed current method, sacrificial anodes design, protective coatings, splash zone protection, cathodic protection monitoring system. 
Underwater repair: Underwater welding, repair schemes for tubular members, grouted sleeve connections, and stressed – grouted connections for tubular joints.

UNIT II 
Static Structural Analysis: Estimation of wave and current loading on framed structures; maximum base shear and overturning methods; Cyclic loads for fatigue analysis.  
Dynamic Structural analysis: Dynamic analysis of framed structures; Mode shapes and Eigen frequency analysis; Wave response; dynamic wave response; frequency and time domain analysis of risers and pipelines.

UNIT III 
Loads on offshore structures: Wind Loads; Wave and Current Loads; Calculation based on Maximum base Shear and Overturning Moments; Design Wave heights and Spectral Definition; Hydrodynamic Coefficients and Marine Growth; Fatigue Load Definition and Joint Probability distribution; Seismic Loads.

UNIT IV 
Foundation for Offshore Structures: Mud-mats: bearing capacity, sliding stability, over-turning stability, short term and long term settlements, factor of safety; Bucket foundation; Suction anchors; Gravity foundation.]]> <![CDATA[Environment Engineering IPU civil notes and question paper free download]]> https://studentsuvidha.com/forum/Thread-Environment-Engineering-IPU-civil-notes-and-question-paper-free-download Mon, 24 Apr 2017 19:48:38 +0000 Dipesh S]]> https://studentsuvidha.com/forum/Thread-Environment-Engineering-IPU-civil-notes-and-question-paper-free-download QUESTION PAPERS:- SYLLABUS:-

UNIT – I 
Concept of unpolluted air, Gaseous and vapour pollutants in atmosphere, Scales of air pollution, Primary and  secondary pollutants, Ambient Air Quality [AAQ], Monitoring for pollutants [SO2, NO2, O3, Particulates and their health effects. Stack monitoring for SOx, NOx and  CO. Effects of air pollution on materials, structures and Human health. Air quality criteria, National air emission standards and AAQ guidelines, Indoor Air pollution. Control and management of indoor and outdoor Air pollution. Green house gases Green house effect, Global warming.

UNIT – II 
Characteristics and  Sources of noise, Legal aspects: Standards of noise, Legislation in India Types of noise: Neighborhood noise, Traffic noise, Occupational noise, Community noise, Health effects of noise, Physiological hazard and  Psychological hazard. Occupational noise-exposure, Noise measuring equipments such as Sound Level Meter. Control of Noise pollution in industrial, residential and  silent zone.  Sources, Composition and  Properties of Municipal solid waste, Handling and  Separation of solid waste, Introduction to Municipal Waste [Management and  Handling Rules, 2000], Disposal of Municipal Solid Wastes.

UNIT – III 
Solid Waste Collection and  Transportation: Types of collection systems [Hauled- container system and  Stationary container system], Collection routes and  their Layout, Solid waste Transfer Stations. Landfills: Classification, Types and  methods, site selection, site preparation. Composition, Characteristics.

UNIT – IV 
Generation and  Control of Landfill gases, Composition, formation, movement and  control of lechate in landfills, landfill design. 
Composting: Theory of composting, manual and mechanized composting, Characterization, Storage and  Segregation of hazardous and biomedical waste Techniques of hazardous and  biomedical waste management.]]> QUESTION PAPERS:- SYLLABUS:-

UNIT – I 
Concept of unpolluted air, Gaseous and vapour pollutants in atmosphere, Scales of air pollution, Primary and  secondary pollutants, Ambient Air Quality [AAQ], Monitoring for pollutants [SO2, NO2, O3, Particulates and their health effects. Stack monitoring for SOx, NOx and  CO. Effects of air pollution on materials, structures and Human health. Air quality criteria, National air emission standards and AAQ guidelines, Indoor Air pollution. Control and management of indoor and outdoor Air pollution. Green house gases Green house effect, Global warming.

UNIT – II 
Characteristics and  Sources of noise, Legal aspects: Standards of noise, Legislation in India Types of noise: Neighborhood noise, Traffic noise, Occupational noise, Community noise, Health effects of noise, Physiological hazard and  Psychological hazard. Occupational noise-exposure, Noise measuring equipments such as Sound Level Meter. Control of Noise pollution in industrial, residential and  silent zone.  Sources, Composition and  Properties of Municipal solid waste, Handling and  Separation of solid waste, Introduction to Municipal Waste [Management and  Handling Rules, 2000], Disposal of Municipal Solid Wastes.

UNIT – III 
Solid Waste Collection and  Transportation: Types of collection systems [Hauled- container system and  Stationary container system], Collection routes and  their Layout, Solid waste Transfer Stations. Landfills: Classification, Types and  methods, site selection, site preparation. Composition, Characteristics.

UNIT – IV 
Generation and  Control of Landfill gases, Composition, formation, movement and  control of lechate in landfills, landfill design. 
Composting: Theory of composting, manual and mechanized composting, Characterization, Storage and  Segregation of hazardous and biomedical waste Techniques of hazardous and  biomedical waste management.]]> <![CDATA[GWCMM IPU civil notes and question paper free download]]> https://studentsuvidha.com/forum/Thread-GWCMM-IPU-civil-notes-and-question-paper-free-download Mon, 24 Apr 2017 19:47:33 +0000 Dipesh S]]> https://studentsuvidha.com/forum/Thread-GWCMM-IPU-civil-notes-and-question-paper-free-download SYLLABUS:-

UNIT-I 
Ground Water Movement and  Contamination: Introduction, Characteristics of Ground Water, Sources and Types of Ground Water Contamination, Principals of Ground Water Movement, General Flow Equations, Unsaturated Flow and Water Table, Ground Water Flow and Well Mechanics, Sustainable Yield, Mass Balance Equations, Specific Storativity, Initial and Boundary Conditions, Boundary Surface, Particular Boundary Conditions, Complete 3-D Mathematical Flow Model, Modeling 2-D Flow in Aquifers, Complete Aquifer Flow Models, Groundwater Maps and Streamlines, Modeling Flow in the Unsaturated Zone.

UNIT-II 
Contaminant transport mechanism: Underground storage tanks, Landfills, Septic Systems, Agricultural Wastes, Return Flow from Irrigation and Sewage, Strategy for Hydrologic Site Investigations, Geologic Data Acquisition, Hydrologic Data Acquisition, Acquisition of Soil and Groundwater Quality Data, Data Evaluation Procedures, Contaminant Transport Mechanism such as Advection, Diffusion and Dispersion, Sorption and Desorption, Biodegradation, Mass Transport Equations, One Dimensional Models, Governing Flow and Transport equations, Analytical Methods, Multi-Dimensional Methods.

UNIT-III 
Numerical Modeling of Contaminant Transport: Introduction to Modeling Inorganic and Organic Solute Transport, Numerical Methods, Finite Difference Methods, Numeric Flow Methods, Contaminant Transport Models, Applying Numerical Models to Field Sites, Fate and Transport of organic Substances in Groundwater, Case Studies of Organic and  inorganic Groundwater Pollution. 
Non-aqueous Phase Liquids (NAPLs): Types of NAPL, Transport, Computational methods, Characterizing NAPLs at Remediation Sites.

UNIT-IV 
Natural Attenuation and Risk Based Corrective Action: General Principles behind Natural Attenuation, Natural Attenuation Protocols and Guidance, Risk Based Corrective Action. 
Ground Water Remediation Alternatives: Introduction to Remediation methods, Remedial Alternatives, Contaminant Methods for Source Control, Hydraulic Controls and Pump and Treat Systems. Bioremediation, Remediating NAPL Sites. Emerging Remediation Technologies, Case Studies of Remediation.]]> SYLLABUS:-

UNIT-I 
Ground Water Movement and  Contamination: Introduction, Characteristics of Ground Water, Sources and Types of Ground Water Contamination, Principals of Ground Water Movement, General Flow Equations, Unsaturated Flow and Water Table, Ground Water Flow and Well Mechanics, Sustainable Yield, Mass Balance Equations, Specific Storativity, Initial and Boundary Conditions, Boundary Surface, Particular Boundary Conditions, Complete 3-D Mathematical Flow Model, Modeling 2-D Flow in Aquifers, Complete Aquifer Flow Models, Groundwater Maps and Streamlines, Modeling Flow in the Unsaturated Zone.

UNIT-II 
Contaminant transport mechanism: Underground storage tanks, Landfills, Septic Systems, Agricultural Wastes, Return Flow from Irrigation and Sewage, Strategy for Hydrologic Site Investigations, Geologic Data Acquisition, Hydrologic Data Acquisition, Acquisition of Soil and Groundwater Quality Data, Data Evaluation Procedures, Contaminant Transport Mechanism such as Advection, Diffusion and Dispersion, Sorption and Desorption, Biodegradation, Mass Transport Equations, One Dimensional Models, Governing Flow and Transport equations, Analytical Methods, Multi-Dimensional Methods.

UNIT-III 
Numerical Modeling of Contaminant Transport: Introduction to Modeling Inorganic and Organic Solute Transport, Numerical Methods, Finite Difference Methods, Numeric Flow Methods, Contaminant Transport Models, Applying Numerical Models to Field Sites, Fate and Transport of organic Substances in Groundwater, Case Studies of Organic and  inorganic Groundwater Pollution. 
Non-aqueous Phase Liquids (NAPLs): Types of NAPL, Transport, Computational methods, Characterizing NAPLs at Remediation Sites.

UNIT-IV 
Natural Attenuation and Risk Based Corrective Action: General Principles behind Natural Attenuation, Natural Attenuation Protocols and Guidance, Risk Based Corrective Action. 
Ground Water Remediation Alternatives: Introduction to Remediation methods, Remedial Alternatives, Contaminant Methods for Source Control, Hydraulic Controls and Pump and Treat Systems. Bioremediation, Remediating NAPL Sites. Emerging Remediation Technologies, Case Studies of Remediation.]]> <![CDATA[FEM in Structural Engineering IPU civil notes and question paper free download]]> https://studentsuvidha.com/forum/Thread-FEM-in-Structural-Engineering-IPU-civil-notes-and-question-paper-free-download Mon, 24 Apr 2017 19:45:58 +0000 Dipesh S]]> https://studentsuvidha.com/forum/Thread-FEM-in-Structural-Engineering-IPU-civil-notes-and-question-paper-free-download SYLLABUS:-

UNIT-I 
Boundary Value Problems and the Need for Numerical Discretisation: Introduction, examples of Continuum problems, history of finite element method. 
Weighted residual methods: Approximation by trial functions, weighted residual forms, piecewise trial functions, weak formulation, Galerkin method, examples of One-, two- and three -dimensional problems.

UNIT-II 
Higher order finite element approximation: Degree of polynomial in trial functions and rate of convergence, the patch test, shape functions for C0 and C1 continuity, one-, two-and three-dimensional shape functions. 
Isoperimetric formulation: The concept of mapping, isoperimetric formulation, numerical integration, mapping and its use in mesh generation.

UNIT-III 
Variational Methods: Variational principles, establishment of natural Variational principles, approximate solution of differential equations by Rayleigh-Ritz method, the use of Lagrange multipliers, general Variational principles, penalty functions, least-square method. 
Partial discretisation and time-dependent problems: Partial discretisation applied to boundary value problems, time-dependent problems via partial discretisation, analytical solution procedures, finite element solution procedures in time domain.

UNIT-IV 
Generalized finite elements and error estimates: The generalized finite element method, the discretisation error in a numerical solution, measure of discretisation error, estimate of discretisation error.
Coordinate Transformation: Transformation of vectors and tensors, transformation of stiffness matrices, degree of freedom within elements, condensation, condensation and recovery algorithm, sub structuring, structural symmetry. []]> SYLLABUS:-

UNIT-I 
Boundary Value Problems and the Need for Numerical Discretisation: Introduction, examples of Continuum problems, history of finite element method. 
Weighted residual methods: Approximation by trial functions, weighted residual forms, piecewise trial functions, weak formulation, Galerkin method, examples of One-, two- and three -dimensional problems.

UNIT-II 
Higher order finite element approximation: Degree of polynomial in trial functions and rate of convergence, the patch test, shape functions for C0 and C1 continuity, one-, two-and three-dimensional shape functions. 
Isoperimetric formulation: The concept of mapping, isoperimetric formulation, numerical integration, mapping and its use in mesh generation.

UNIT-III 
Variational Methods: Variational principles, establishment of natural Variational principles, approximate solution of differential equations by Rayleigh-Ritz method, the use of Lagrange multipliers, general Variational principles, penalty functions, least-square method. 
Partial discretisation and time-dependent problems: Partial discretisation applied to boundary value problems, time-dependent problems via partial discretisation, analytical solution procedures, finite element solution procedures in time domain.

UNIT-IV 
Generalized finite elements and error estimates: The generalized finite element method, the discretisation error in a numerical solution, measure of discretisation error, estimate of discretisation error.
Coordinate Transformation: Transformation of vectors and tensors, transformation of stiffness matrices, degree of freedom within elements, condensation, condensation and recovery algorithm, sub structuring, structural symmetry. []]> <![CDATA[Advanced Geotechnical Engineering IPU civil notes and question paper free download]]> https://studentsuvidha.com/forum/Thread-Advanced-Geotechnical-Engineering-IPU-civil-notes-and-question-paper-free-download Mon, 24 Apr 2017 19:44:24 +0000 Dipesh S]]> https://studentsuvidha.com/forum/Thread-Advanced-Geotechnical-Engineering-IPU-civil-notes-and-question-paper-free-download SYLLABUS:-

UNIT-I 
Soil Dynamics: One Dimensional wave propagation, One Dimensional Wave in layered body, impedance ratio, angle of refraction, critical angle of incidence, introduction of attenuation of stress waves, Definitions of Material Damping and  Radiation Damping in soil. Measurements of Wave Propagation Velocity, Shear Modulus, Thickness of soil layers etc; Field Tests like Low Strain Test, Seismic Reflection Test, Seismic Refraction Test for Horizontal Layering and inclined or irregular layering, Suspension Logging Test, Steady States Vibration [Raleigh wave] Test, Seismic Cross Hole Test, Seismic Down Hole Test, Seismic Cone Test, Details and interpretation of Standard Penetration Test and  Cone Penetration Tests. Laboratory Tests: Cyclic Triaxial Shear Test, Introduction of Centrifuge and Shaking Table Test.

UNIT-II 
Machine Foundation: Types of Machine Foundations, General Requirements, Design Data, Dynamic Loads induced in simple Crank Mechanism, Permissible Amplitudes and Bearing Pressure, General Theory of Transmissibility of force for Vibrating machines in brief.
Analysis and  Design of Block Type Machine Foundations: Brief review of Empirical Methods based on considering Soil as a Semi infinite Elastic Solid and Soil as a spring, Barkans Method of Analysis for Block Foundations including Vertical sliding, rocking and yawing of vibrations. Introduction of codes related with Machine Foundations.

UNIT-III 
Foundation on Expansive Soils: Identification of expensive soils by field inspection and  Laboratory Tests, general mechanism and characterization of swelling, Types of Damages in Building on expensive clay. Design of foundation on expensive soils like under-reamed piles, Computation of collapse settlement, Retaining walls in expansive soils, Treatment of cracked buildings.

UNIT-IV 
Environmental Geo-technology: Contamination due to landfills, subsurface contamination due to lechate and  its effects. One dimensional analysis of contaminant transport, contaminated sites, Containment of solid waste in landfills, Vertical barrier for containment, Geo-technical reuse of construction and industrial waste materials Case study of Ash disposal from Thermal power plant, Ash pond and its design with/without geo-textiles, Environmental impact and  control.]]> SYLLABUS:-

UNIT-I 
Soil Dynamics: One Dimensional wave propagation, One Dimensional Wave in layered body, impedance ratio, angle of refraction, critical angle of incidence, introduction of attenuation of stress waves, Definitions of Material Damping and  Radiation Damping in soil. Measurements of Wave Propagation Velocity, Shear Modulus, Thickness of soil layers etc; Field Tests like Low Strain Test, Seismic Reflection Test, Seismic Refraction Test for Horizontal Layering and inclined or irregular layering, Suspension Logging Test, Steady States Vibration [Raleigh wave] Test, Seismic Cross Hole Test, Seismic Down Hole Test, Seismic Cone Test, Details and interpretation of Standard Penetration Test and  Cone Penetration Tests. Laboratory Tests: Cyclic Triaxial Shear Test, Introduction of Centrifuge and Shaking Table Test.

UNIT-II 
Machine Foundation: Types of Machine Foundations, General Requirements, Design Data, Dynamic Loads induced in simple Crank Mechanism, Permissible Amplitudes and Bearing Pressure, General Theory of Transmissibility of force for Vibrating machines in brief.
Analysis and  Design of Block Type Machine Foundations: Brief review of Empirical Methods based on considering Soil as a Semi infinite Elastic Solid and Soil as a spring, Barkans Method of Analysis for Block Foundations including Vertical sliding, rocking and yawing of vibrations. Introduction of codes related with Machine Foundations.

UNIT-III 
Foundation on Expansive Soils: Identification of expensive soils by field inspection and  Laboratory Tests, general mechanism and characterization of swelling, Types of Damages in Building on expensive clay. Design of foundation on expensive soils like under-reamed piles, Computation of collapse settlement, Retaining walls in expansive soils, Treatment of cracked buildings.

UNIT-IV 
Environmental Geo-technology: Contamination due to landfills, subsurface contamination due to lechate and  its effects. One dimensional analysis of contaminant transport, contaminated sites, Containment of solid waste in landfills, Vertical barrier for containment, Geo-technical reuse of construction and industrial waste materials Case study of Ash disposal from Thermal power plant, Ash pond and its design with/without geo-textiles, Environmental impact and  control.]]> <![CDATA[GWADM IPU civil notes and question paper free download]]> https://studentsuvidha.com/forum/Thread-GWADM-IPU-civil-notes-and-question-paper-free-download Mon, 24 Apr 2017 19:42:50 +0000 Dipesh S]]> https://studentsuvidha.com/forum/Thread-GWADM-IPU-civil-notes-and-question-paper-free-download QUESTION PAPERS:-
SYLLABUS:-

UNIT-I  
Types of Water-Bearing Formations, Influence of Physiography and Climate on Ground Water availability, Ground Water Investigations, Surface Investigations, Hydrological Investigations, Test Drilling, Geophysical Methods, Resistivity Method, Electric Logging, Gamma-Ray Logging, electrical Resistivity Surveying, Seismic Refraction Surveying, Ground Water Resource Assessment, methods of Artificial Recharge of  Ground Water, Ground Water Pollution, Ground Water Quality, Conjunctive Use of Ground Water with Canal Water. 
Aquifer Characteristics Influencing Yield of Wells, Static Water Level, Transmissibility, Coefficient of Storage, Specific Yield, Hydraulic Resistance, Leakage Factor, Steady State Radial Flow, Theoretical Aspects of  Steady State Flow to Cavity Wells.

UNIT-II 
Unsteady State Flow to Wells in Unconfined and Confined Aquifers, Procedure for Determining Hydraulic Properties of Confined Aquifers, Cooper-Jacob Method of Solution, Recovery Test, Unsteady State Flow to Cavity Wells, Procedure for Determining Hydraulic Properties of confined Aquifers using Cavity Wells. Pumping Tests, Step Drawdown Test, Significance of Well Loss Coefficient, Pumping Test Procedures, Observation Wells, Well Interference, Interference of Wells in Confined Aquifers. 
Design of Open Wells, Depth of Well, Thickness of Well  Lining, Nomograph for Design of Well Steining,  Design of RCC Lining, Weep Holes in Well Lining, Well Curbs, Design of Well Curb,  
Increasing the Yield of Open Wells, Horizontal Boring in Open Wells, Installation of Radial Filters in Wells in Alluvial Formations, Radial Boring in Open Wells. 
Pollution Travel in Soil and Aquifers, Location and Design of Wells with Sanitary Protection, Well Location, Well Construction, Disinfection of Wells.

UNIT-III 
Multiple-Well System, Radial Wells and Infiltration Galleries, Design of Tube Wells, Design of Housing Pipe and Well Casing, Bore Size and Well Depth, Selection of Strata to be Screened, Design of Well Screen, Design of Gravel Pack, Sanitary Protection of Tube Wells, Common Causes of Contamination and Their Remedies, Design of Skimming Wells. 
Ground Water Exploration, Geologic and hydrologic methods, Surface geophysical methods, Hydro-geologic well logging, Geophysical well logging, Tracer techniques.

UNIT-IV 
Ground Water Modelling using finite difference, use of appropriate software like Modflow etc, Case Study. Pumping of Water, Design of Centrifugal pumps, Design of Impeller, Shaft Impeller inlet and vane angles, Diameter of the Eye of Impeller, Impeller outlet and vane angle, Design of Impeller vanes, Design of Volute, Design of vanes, effect of Suction lift on discharge and efficiency, Centrifugal pump installation in open wells/tube wells, operation and  maintenance. 
Vertical Turbine pumps and their installation, operation and maintenance, submersible pump and their installation, operation and  maintenance, propeller pumps and their operating characteristics and installation,  Jet pumps, Performance characteristics and installation.]]> QUESTION PAPERS:-
SYLLABUS:-

UNIT-I  
Types of Water-Bearing Formations, Influence of Physiography and Climate on Ground Water availability, Ground Water Investigations, Surface Investigations, Hydrological Investigations, Test Drilling, Geophysical Methods, Resistivity Method, Electric Logging, Gamma-Ray Logging, electrical Resistivity Surveying, Seismic Refraction Surveying, Ground Water Resource Assessment, methods of Artificial Recharge of  Ground Water, Ground Water Pollution, Ground Water Quality, Conjunctive Use of Ground Water with Canal Water. 
Aquifer Characteristics Influencing Yield of Wells, Static Water Level, Transmissibility, Coefficient of Storage, Specific Yield, Hydraulic Resistance, Leakage Factor, Steady State Radial Flow, Theoretical Aspects of  Steady State Flow to Cavity Wells.

UNIT-II 
Unsteady State Flow to Wells in Unconfined and Confined Aquifers, Procedure for Determining Hydraulic Properties of Confined Aquifers, Cooper-Jacob Method of Solution, Recovery Test, Unsteady State Flow to Cavity Wells, Procedure for Determining Hydraulic Properties of confined Aquifers using Cavity Wells. Pumping Tests, Step Drawdown Test, Significance of Well Loss Coefficient, Pumping Test Procedures, Observation Wells, Well Interference, Interference of Wells in Confined Aquifers. 
Design of Open Wells, Depth of Well, Thickness of Well  Lining, Nomograph for Design of Well Steining,  Design of RCC Lining, Weep Holes in Well Lining, Well Curbs, Design of Well Curb,  
Increasing the Yield of Open Wells, Horizontal Boring in Open Wells, Installation of Radial Filters in Wells in Alluvial Formations, Radial Boring in Open Wells. 
Pollution Travel in Soil and Aquifers, Location and Design of Wells with Sanitary Protection, Well Location, Well Construction, Disinfection of Wells.

UNIT-III 
Multiple-Well System, Radial Wells and Infiltration Galleries, Design of Tube Wells, Design of Housing Pipe and Well Casing, Bore Size and Well Depth, Selection of Strata to be Screened, Design of Well Screen, Design of Gravel Pack, Sanitary Protection of Tube Wells, Common Causes of Contamination and Their Remedies, Design of Skimming Wells. 
Ground Water Exploration, Geologic and hydrologic methods, Surface geophysical methods, Hydro-geologic well logging, Geophysical well logging, Tracer techniques.

UNIT-IV 
Ground Water Modelling using finite difference, use of appropriate software like Modflow etc, Case Study. Pumping of Water, Design of Centrifugal pumps, Design of Impeller, Shaft Impeller inlet and vane angles, Diameter of the Eye of Impeller, Impeller outlet and vane angle, Design of Impeller vanes, Design of Volute, Design of vanes, effect of Suction lift on discharge and efficiency, Centrifugal pump installation in open wells/tube wells, operation and  maintenance. 
Vertical Turbine pumps and their installation, operation and maintenance, submersible pump and their installation, operation and  maintenance, propeller pumps and their operating characteristics and installation,  Jet pumps, Performance characteristics and installation.]]> <![CDATA[Transportation, Planning & Mgmt. IPU civil notes and question paper free download]]> https://studentsuvidha.com/forum/Thread-Transportation-Planning-Mgmt-IPU-civil-notes-and-question-paper-free-download Mon, 24 Apr 2017 19:41:03 +0000 Dipesh S]]> https://studentsuvidha.com/forum/Thread-Transportation-Planning-Mgmt-IPU-civil-notes-and-question-paper-free-download SYLLABUS:-

UNIT-I 
Urban travel characteristics, System approach to Traffic Planning Process, Methods of Measuring Spot Speeds, Radar Speed Meters, Video Camera Method, Moving Observer Method, Presentation of Travel Time an Journey Speed Data, Vehicle Volume Classification and Occupancy Counts by manual methods, combination of manual and mechanical method, Origin-Destination Survey, Parking Surveys, Use of photographic Techniques in Traffic Survey, Analysis and Interpretation of Traffic Study, fitting a Normal Distribution Curve to Observed Speed Data, Accuracy of sampling, Time Mean Speed and Space Mean Speed. 
Traffic Forecasting using travel demand function, Traffic and Parking Problems, Parking Space requirement standards, Design standards for on-street and off-street parking facilities. Public transport systems, planning for pedestrians and bicycles.

UNIT-II 
Number and Location of Traffic Signals, Fixed Time Signals and Vehicle Actuated signals, Optimum Cycle Length, Co-Coordinated Control of Signals, Delay at Signalized Intersections Regulation of Vehicle Speed, Regulation concerning the Driver, Traffic Parking Regulations, Enforcement of Regulation, 
Introduction to Travel Demand and Traffic Management, Traffic Management measures and their influence on accident prevention, Road Safety Audit. Theory of Traffic Flow, Basic Diagram of Traffic flow, Speed Flow Curves, Vehicular Stream equations and diagrams, Cases of uniform flow, Highway traffic flow, Shock Waves in traffic. Uninterrupted speed flow relationships, Fleet size, Transit Network fleet size, Minimum station headway or interrupted flow, Freeway capacity and level of service, Freeway congestion quantification. 

UNIT-III 
Application of Queuing approach to traffic flow, Probabilistic aspects of Traffic flow, Poisson’s Distribution of Vehicle Arrivals, Gap and Headway Distribution, Analysis of Traffic delay at uncontrolled intersections using Adam’s formula, Trip generation models: Zonal models, Category analysis. Trip distribution models: Growth factor models, Gravity models. Mode split analysis: Mode choice behavior, Mode split curves, Probabilistic models.

UNIT-IV 
Urban Intelligent Transport System, Urban Transportation issues. Transportation Demand Analysis, Sequential Demand Analysis, Development of comprehensive mobility plan, Standards of Intelligent Transportation System [ITS], Experience of ITS in Europe/Japan/North America, Sensors in ITS, ITS applications such as Detector, Traffic Signal systems, Freeway Management, Electronic Road Pricing and Automatic vehicle classification, ITS for traffic law enforcement, Application of GIS in ITS. Simultaneous or direct demand formulation, Model of demand elasticities, Direct and Cross elasticities Comprehensive examples of traffic impact study.]]> SYLLABUS:-

UNIT-I 
Urban travel characteristics, System approach to Traffic Planning Process, Methods of Measuring Spot Speeds, Radar Speed Meters, Video Camera Method, Moving Observer Method, Presentation of Travel Time an Journey Speed Data, Vehicle Volume Classification and Occupancy Counts by manual methods, combination of manual and mechanical method, Origin-Destination Survey, Parking Surveys, Use of photographic Techniques in Traffic Survey, Analysis and Interpretation of Traffic Study, fitting a Normal Distribution Curve to Observed Speed Data, Accuracy of sampling, Time Mean Speed and Space Mean Speed. 
Traffic Forecasting using travel demand function, Traffic and Parking Problems, Parking Space requirement standards, Design standards for on-street and off-street parking facilities. Public transport systems, planning for pedestrians and bicycles.

UNIT-II 
Number and Location of Traffic Signals, Fixed Time Signals and Vehicle Actuated signals, Optimum Cycle Length, Co-Coordinated Control of Signals, Delay at Signalized Intersections Regulation of Vehicle Speed, Regulation concerning the Driver, Traffic Parking Regulations, Enforcement of Regulation, 
Introduction to Travel Demand and Traffic Management, Traffic Management measures and their influence on accident prevention, Road Safety Audit. Theory of Traffic Flow, Basic Diagram of Traffic flow, Speed Flow Curves, Vehicular Stream equations and diagrams, Cases of uniform flow, Highway traffic flow, Shock Waves in traffic. Uninterrupted speed flow relationships, Fleet size, Transit Network fleet size, Minimum station headway or interrupted flow, Freeway capacity and level of service, Freeway congestion quantification. 

UNIT-III 
Application of Queuing approach to traffic flow, Probabilistic aspects of Traffic flow, Poisson’s Distribution of Vehicle Arrivals, Gap and Headway Distribution, Analysis of Traffic delay at uncontrolled intersections using Adam’s formula, Trip generation models: Zonal models, Category analysis. Trip distribution models: Growth factor models, Gravity models. Mode split analysis: Mode choice behavior, Mode split curves, Probabilistic models.

UNIT-IV 
Urban Intelligent Transport System, Urban Transportation issues. Transportation Demand Analysis, Sequential Demand Analysis, Development of comprehensive mobility plan, Standards of Intelligent Transportation System [ITS], Experience of ITS in Europe/Japan/North America, Sensors in ITS, ITS applications such as Detector, Traffic Signal systems, Freeway Management, Electronic Road Pricing and Automatic vehicle classification, ITS for traffic law enforcement, Application of GIS in ITS. Simultaneous or direct demand formulation, Model of demand elasticities, Direct and Cross elasticities Comprehensive examples of traffic impact study.]]> <![CDATA[Analysis and Design of Bridges IPU civil notes and question paper free download]]> https://studentsuvidha.com/forum/Thread-Analysis-and-Design-of-Bridges-IPU-civil-notes-and-question-paper-free-download Mon, 24 Apr 2017 19:39:26 +0000 Dipesh S]]> https://studentsuvidha.com/forum/Thread-Analysis-and-Design-of-Bridges-IPU-civil-notes-and-question-paper-free-download QUESTION PAPERS:-
SYLLABUS:-

UNIT-I 
Selection of bridge site, preliminary data to be collected, preliminary drawings, design discharge, linear water way, economical span, location of piers and abutments, vertical clearance, width of carriageway. Standard Specifications of Bridges, IRC Bridge codes, clearances, Dead load, live loads, application of LL on deck slabs, impact effect of wind load, longitudinal forces, centrifugal forces, Force due to water currents, buoyancy effect, temperature effects, secondary stresses, errection seismic force, specifications for railway bridges, forces due to earthquake on railway bridges.

UNIT-II 
Reinforced concrete bridges, box culvers, T-beam bridges, hollow girder bridges, continuous bridges, balanced cantilever bridges, arch bridges, [Illustrative examples of culverts, T-beam bridges, balanced cantilever bridge and arch bridges.

UNIT-III 
Steel bridges, plate girder bridges, box girder ridges, cable stayed bridges, suspension bridges [Illustrative examples of plate girder, truss bridge and suspension bridges]. Importance of bearings, and joints, bearings for slab bridges, bearing for girder bridges, expansion bearings, modern trend in bearing designs, joints, expansion joints.

UNIT-IV 
Design of prestressed concrete slab deck, post tensioned prestressed concrete, T-Beam and  Slab, Bridge deckstructural components, Load distribution methods and design, Assembly of prestressing steel and  grouting of ducts, Expansion joints for bridge decks. Design of two span continuous prestressed concrete bridge deck, Cellular Box girder bridges. []]> QUESTION PAPERS:-
SYLLABUS:-

UNIT-I 
Selection of bridge site, preliminary data to be collected, preliminary drawings, design discharge, linear water way, economical span, location of piers and abutments, vertical clearance, width of carriageway. Standard Specifications of Bridges, IRC Bridge codes, clearances, Dead load, live loads, application of LL on deck slabs, impact effect of wind load, longitudinal forces, centrifugal forces, Force due to water currents, buoyancy effect, temperature effects, secondary stresses, errection seismic force, specifications for railway bridges, forces due to earthquake on railway bridges.

UNIT-II 
Reinforced concrete bridges, box culvers, T-beam bridges, hollow girder bridges, continuous bridges, balanced cantilever bridges, arch bridges, [Illustrative examples of culverts, T-beam bridges, balanced cantilever bridge and arch bridges.

UNIT-III 
Steel bridges, plate girder bridges, box girder ridges, cable stayed bridges, suspension bridges [Illustrative examples of plate girder, truss bridge and suspension bridges]. Importance of bearings, and joints, bearings for slab bridges, bearing for girder bridges, expansion bearings, modern trend in bearing designs, joints, expansion joints.

UNIT-IV 
Design of prestressed concrete slab deck, post tensioned prestressed concrete, T-Beam and  Slab, Bridge deckstructural components, Load distribution methods and design, Assembly of prestressing steel and  grouting of ducts, Expansion joints for bridge decks. Design of two span continuous prestressed concrete bridge deck, Cellular Box girder bridges. []]> <![CDATA[PMCP IPU civil notes and question paper free download]]> https://studentsuvidha.com/forum/Thread-PMCP-IPU-civil-notes-and-question-paper-free-download Mon, 24 Apr 2017 19:38:15 +0000 Dipesh S]]> https://studentsuvidha.com/forum/Thread-PMCP-IPU-civil-notes-and-question-paper-free-download QUESTION PAPERS:-
SYLLABUS:-

UNIT-I 
Master Plan and  Building By laws: Objectives and  necessity of Master Plan, Land use features, Building Bylaws, Function of Local Authority. Provision of Building Regulation, Salient features of Land Acquisition, etc 
Project Planning: Scheduling, Controlling, Methods of Planning and Programming, Schedules for Labour, Materials and Equipment, Graphical Presentation of Earthwork. 
Work Accounts: Muster roll, measurement book, cash book imprest, temporary advance, classification of stores, stock, receipt and issue of stores, authority of use, and materials at site account, Master Test Register- Site Order Book, Dismantle Register, Inspection Register, Hindrance Register, Building Register surplus and shortage, A Sample Case Study.

UNIT-II 
Network and Network Analysis: CPM, Activity time estimate, earliest event time, Latest allowable occurrence time, Start and finish time of activity, Float, Critical activities and critical path, updating crashing. Development of PERT network, Network rules, Graphical guidelines for networks, Work breakdown structure, Time estimates and computations using PERT. 

UNIT-III 
Contract Management: Scope of work, Detailed Estimate [approved plan], Administrative approval/Estimate Sanction, Notice inviting tenders and its types, Tender, earnest money deposit, security deposit, types of contracts, Essentials of legally valid contract, Contract between Engineer and  Employers, Appointment and  authority of Engineer for execution of civil construction works, Category of contractors. 
Public Works Administration: C.P.W.D. Organization set up, system of accounts, classes of works in PWD, Estimates, Delhi Scheduled Rules [CPWD], Cost adjustment indices sub head, sub works, administrative approval, technical sanction, possession of funds, expenditure sanction, Various methods of executing works.

UNIT-IV 
Project Monitoring using PRIMAVERA or MS Project 
Construction Equipment: Equipment for excavation and transportation of earth, hauling equipment, hoisting equipment, pile driving equipment, Equipment for pumping water, Dozers and cranes, Scraper, Batching plants, RMC equipment etc. []]> QUESTION PAPERS:-
SYLLABUS:-

UNIT-I 
Master Plan and  Building By laws: Objectives and  necessity of Master Plan, Land use features, Building Bylaws, Function of Local Authority. Provision of Building Regulation, Salient features of Land Acquisition, etc 
Project Planning: Scheduling, Controlling, Methods of Planning and Programming, Schedules for Labour, Materials and Equipment, Graphical Presentation of Earthwork. 
Work Accounts: Muster roll, measurement book, cash book imprest, temporary advance, classification of stores, stock, receipt and issue of stores, authority of use, and materials at site account, Master Test Register- Site Order Book, Dismantle Register, Inspection Register, Hindrance Register, Building Register surplus and shortage, A Sample Case Study.

UNIT-II 
Network and Network Analysis: CPM, Activity time estimate, earliest event time, Latest allowable occurrence time, Start and finish time of activity, Float, Critical activities and critical path, updating crashing. Development of PERT network, Network rules, Graphical guidelines for networks, Work breakdown structure, Time estimates and computations using PERT. 

UNIT-III 
Contract Management: Scope of work, Detailed Estimate [approved plan], Administrative approval/Estimate Sanction, Notice inviting tenders and its types, Tender, earnest money deposit, security deposit, types of contracts, Essentials of legally valid contract, Contract between Engineer and  Employers, Appointment and  authority of Engineer for execution of civil construction works, Category of contractors. 
Public Works Administration: C.P.W.D. Organization set up, system of accounts, classes of works in PWD, Estimates, Delhi Scheduled Rules [CPWD], Cost adjustment indices sub head, sub works, administrative approval, technical sanction, possession of funds, expenditure sanction, Various methods of executing works.

UNIT-IV 
Project Monitoring using PRIMAVERA or MS Project 
Construction Equipment: Equipment for excavation and transportation of earth, hauling equipment, hoisting equipment, pile driving equipment, Equipment for pumping water, Dozers and cranes, Scraper, Batching plants, RMC equipment etc. []]>