DOWNLOAD PAPERS HERE
DOWNLOAD NOTES HERE
SECTION-A
Unit-I: Elementary treatment of concrete technology: Physical requirements of cement, aggregate, admixture and reinforcement, Strength and durability, shrinkage and creep. Design of concrete mixes, Acceptability criterion, I.S. Specifications.
Unit-II: Design Philosophies in Reinforced Concrete: Working stress and limit state methods, Limit state v/s working stress method, Building code, Normal distribution curve, characteristic strength and characteristics loads, design values, Partial safety factors and factored loads, stress -strain relationship for concrete and steel.
SECTION-B
Unit-III: Working Stress Method: Basic assumptions, permissible stresses in concrete and steel, design of singly and doubly reinforced rectangular and flanged beams in flexure, steel beam theory, inverted flanged beams, design examples.
Unit-IV: Limit State Method: Basic assumptions, Analysis and design of singly and doubly reinforced rectangular flanged beams, minimum and maximum reinforcement requirement, design ex amples.
Unit-V: Analysis and Design of Sections in shear, bond and torsion -Diagonal tension, shear reinforcement, development length, Anchorage and flexural bond, Torsional, stiffness, equivalent shear, Torsional reinforcement, Design examples.
SECTION-C
Unit-VI: Concrete Reinforcement and Detailing-Requirements of good detailing, cover to reinforcement, spacing of reinforcement, reinforcement splicing, Anchoring reinforcing bars in flexure and shear, curtailment of reinforcement.
Unit-VII: Serviceability Limit State -Control of deflection, cracking, slenderness and vibrations, deflection and moment relationship for limiting values of span to depth, limit state of crack width, Design examples.
Unit-VIII: One way and Two Ways Slabs -General considerations, Design of one way and two ways slabs for distributed and concentrated loads, Non-rectangular slabs, openings in slabs, Design Examples
SECTION-D
Unit-IX: Columns and Footings-Effective length, Minimum eccentricity, short columns under axial compression, Uniaxial and biaxial bending, slender columns, Isolated and wall footings, Design examples.
Unit-X: Retaining Walls -Classification, Forces on retaining walls, design criteria, stability requirements, Proportioning of cantilever retaining walls, counterfort retaining walls, criteria for design of counterforts, design examples.
BOOKS RECOMMENDED:
1. Design of Reinforced Concrete Structures,P.Dayaratnam,Oxford & IBH Pub.,N.Delhi.
2. Reinforced Concrete-Limit State Design, A.K.Jain, Nem Chand & Bros.,Roorkee.
3. Reinforced Concrete, I.C.Syal & A,K,Goel, A.H,Wheeler & Co.Delhi.
4. Reinforced Concrete Design, S.N.Sinha, TMH Pub.,N.Delhi.
5. SP-16(S&T)-1980, Design Aids for Reinforced Concrete to IS:456, BIS, N.Delhi.
6. SP-34(S&T)-1987 Handbook on Concrete Reinforcement and Detailing`, BIS, N.Delhi.
- Click here to download paper of year 2011
- Click here to download paper of year 2012
- Click here to download paper of year 2013
- Click here to download paper of year 2014
- Click here to download paper of year 2015
- Click here to download paper of year 2016
- Click here to download paper of year 2017
- SOME EXTRA
DOWNLOAD NOTES HERE
SECTION-A
Unit-I: Elementary treatment of concrete technology: Physical requirements of cement, aggregate, admixture and reinforcement, Strength and durability, shrinkage and creep. Design of concrete mixes, Acceptability criterion, I.S. Specifications.
Unit-II: Design Philosophies in Reinforced Concrete: Working stress and limit state methods, Limit state v/s working stress method, Building code, Normal distribution curve, characteristic strength and characteristics loads, design values, Partial safety factors and factored loads, stress -strain relationship for concrete and steel.
SECTION-B
Unit-III: Working Stress Method: Basic assumptions, permissible stresses in concrete and steel, design of singly and doubly reinforced rectangular and flanged beams in flexure, steel beam theory, inverted flanged beams, design examples.
Unit-IV: Limit State Method: Basic assumptions, Analysis and design of singly and doubly reinforced rectangular flanged beams, minimum and maximum reinforcement requirement, design ex amples.
Unit-V: Analysis and Design of Sections in shear, bond and torsion -Diagonal tension, shear reinforcement, development length, Anchorage and flexural bond, Torsional, stiffness, equivalent shear, Torsional reinforcement, Design examples.
SECTION-C
Unit-VI: Concrete Reinforcement and Detailing-Requirements of good detailing, cover to reinforcement, spacing of reinforcement, reinforcement splicing, Anchoring reinforcing bars in flexure and shear, curtailment of reinforcement.
Unit-VII: Serviceability Limit State -Control of deflection, cracking, slenderness and vibrations, deflection and moment relationship for limiting values of span to depth, limit state of crack width, Design examples.
Unit-VIII: One way and Two Ways Slabs -General considerations, Design of one way and two ways slabs for distributed and concentrated loads, Non-rectangular slabs, openings in slabs, Design Examples
SECTION-D
Unit-IX: Columns and Footings-Effective length, Minimum eccentricity, short columns under axial compression, Uniaxial and biaxial bending, slender columns, Isolated and wall footings, Design examples.
Unit-X: Retaining Walls -Classification, Forces on retaining walls, design criteria, stability requirements, Proportioning of cantilever retaining walls, counterfort retaining walls, criteria for design of counterforts, design examples.
BOOKS RECOMMENDED:
1. Design of Reinforced Concrete Structures,P.Dayaratnam,Oxford & IBH Pub.,N.Delhi.
2. Reinforced Concrete-Limit State Design, A.K.Jain, Nem Chand & Bros.,Roorkee.
3. Reinforced Concrete, I.C.Syal & A,K,Goel, A.H,Wheeler & Co.Delhi.
4. Reinforced Concrete Design, S.N.Sinha, TMH Pub.,N.Delhi.
5. SP-16(S&T)-1980, Design Aids for Reinforced Concrete to IS:456, BIS, N.Delhi.
6. SP-34(S&T)-1987 Handbook on Concrete Reinforcement and Detailing`, BIS, N.Delhi.
Part Time Work For Students
Win Free Netflix Account
![[Image: ad%20728x90.png]](https://rdevelopers.com/wp-content/uploads/adbanner/ad%20728x90.png)