• 2 Vote(s) - 3.5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
MECHANICS OF SOLIDS UPTU BTECH syllabus with notes
#1
 MECHANICS OF SOLIDS                 will update index soon till then download notes from notes section                                                        


UNIT-I
Compound stress and strains:      Introduction, normal stress and strain, shear stress and strain, stresses on inclines sections, strain energy, impact loads and stresses, state of plane stress, principal stress and strain, maximum shear stress, Mohr’s stress circle, three dimensional state of stress & strain, equilibrium equations, generalized Hook’s law, theories of failure


UNIT –II
Stresses in Beams: Pure Bending, normal stresses in beams, shear stresses in beams due to transverse and axial loads, composite beams.

Deflection of Beams: Equation of elastic curve, cantilever and simply supported beams, Macaulay’s method, moment area method, fixed and continuous beams

Torsion: Torsion, combined bending & torsion of solid & hollow shafts, torsion of thin walled tubes



UNIT-III
Helical and Leaf Springs: Deflection of springs by energy method, helical springs under axial load and under axial twist (respectively for circular and square cross sections) axial load and twisting moment acting simultaneously both for open and closed coiled springs, laminated springs.

Columns and Struts: Buckling and stability, slenderness ratio, combined bending and direct stress, middle third and middle quarter rules, struts with different end conditions, Euler’s theory for pin ended columns, effect of end conditions on column buckling, Ranking Gordon formulae, examples of columns in mechanical equipments and machines.



UNIT-IV
Thin cylinders & spheres: Introduction, difference between thin walled and thick walled pressure vessels, Thin walled spheres and cylinders, hoop and axial stresses and strain, volumetric strain.

Thick cylinders: Radial, axial and circumferential stresses in thick cylinders subjected to internal or external pressures, compound cylinders, stresses in rotating shaft and cylinders, stresses due to interference fits.


UNIT-V
Curved Beams: Bending of beams with large initial curvature, position of neutral axis for rectangular, trapezoidal and circular cross sections, stress in crane hooks, stress in circular rings subjected to tension or compression.

Unsymmetrical Bending: Properties of beam cross-section, slope of neutral axis, stress and deflection in unsymmetrical bending, determination of shear center and flexural axis (for symmetry about both axis and about one axis) for I-section and channel section.


Books and References :

1.    Mechanics of Materials by Hibbeler, Pearson.
2.    Mechanics of Materials by.Beer, Jhonston, DEwolf and Mazurek, TMH
3.     Strength of Materials by Pytel and Singer, Harper Collins
4.    Strength of Materials by Ryder, Macmillan.
5.    Strength of Materials by Timoshenko and & Yσungs, East West Press.
6.    Introduction to Solid Mechanics by Shames, PHI
7.    Strength of Materials by Nag and Chandra, Wiley India.
8.    Strength of Materials by Nash (Sp Indian Edition), TMH
9.    Strength of Materials by Jindal, Pearson Education
10.  Strength of Material by Bhavikatti, Vikas Publishing.
11.  Fundamentals of Solid Mechanics by Gambhir, PHI
12.  Strength of Materials by Basavajaiah and Mahadevappa, University Press.
 
 

Part Time Work For Students

Part Time Work

Win Free Netflix Account

Part Time Work




  Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  aktu SYLLABUS buliding materials aktu btech 0 1,223 09-18-2017, 03:19 PM
Last Post: aktu btech
  SURVEYING 1 ECE 303 UPTU BTECH PAPER YEAR 2012 rkrusty 0 1,892 03-26-2015, 04:07 AM
Last Post: rusty cool
  SURVEYING 1 ECE 303 UPTU BTECH PAPER YEAR 2011 rkrusty 0 1,301 03-26-2015, 04:07 AM
Last Post: rusty cool
  SURVEYING 1 ECE 303 UPTU BTECH PAPER YEAR 2009 rkrusty 0 1,520 03-26-2015, 04:07 AM
Last Post: rusty cool
  Industrial sociology UPTU btech NOTES and PAPERS free download rkrusty 0 13,383 03-26-2015, 03:57 AM
Last Post: rusty cool
  Industrial sociology UPTU btech PAPER free download year 2011 rkrusty 0 3,506 03-26-2015, 03:56 AM
Last Post: rusty cool
  Industrial sociology UPTU btech PAPER free download year 2010 rkrusty 0 2,356 03-26-2015, 03:56 AM
Last Post: rusty cool
  Industrial sociology UPTU btech PAPER free download year 2009 rkrusty 0 3,593 03-26-2015, 03:56 AM
Last Post: rusty cool
  BUILDING MATERIALS ECE 302 UPTU BTECH PAPER YEAR 2012 rkrusty 0 1,767 03-26-2015, 03:09 AM
Last Post: rusty cool
  BUILDING MATERIALS ECE 302 UPTU BTECH PAPER YEAR 2011 rkrusty 0 1,361 03-26-2015, 03:08 AM
Last Post: rusty cool

Forum Jump:


Users browsing this thread: 1 Guest(s)